Solar-powered sightseeing vehicle manufacturer: Vehicle usage precautions and analysis of common faults and their solutions

Solar-powered sightseeing vehicle manufacturer: Important precautions during vehicle use and maintenance, as well as descriptions of several common faults, including their symptoms, causes, basic troubleshooting methods, and emergency handling measures. Please read carefully to avoid traffic accidents and ensure personnel safety. 

I. Vehicle Usage Precautions: 

Do not place any debris on the surface of the battery, and keep the surface clean. 

2. After the vehicle chassis is damaged (due to a collision), check if the wires are deformed or damaged; 

3. No external power supply, without altering the vehicle's wiring; 

4. Solar-powered sightseeing vehicle manufacturer: The electronic control systems for each vehicle are pre-installed and matched with the vehicle. There is no need to modify the control program parameters. In case of replacement of the electronic control system, please contact the after-sales service personnel. 

5. Use the batteries and chargers that are compatible with the vehicle. If you need to replace the batteries and chargers, contact the after-sales service personnel.

6. Driving beyond the load limit on road conditions not within the design scope; 

7. Regularly maintain the vehicle. 

II. Precautions for Battery Charging: 

The charging curve of the charger is compatible with that of the battery. Do not use any other chargers to charge the vehicle. 

2. Charging should be carried out in a well-ventilated and dry environment. 

3. Use a 220V power supply that complies with safety standards. 

4. The overcurrent and power of the 220V power supply meet the charging requirements of the charger. 

5. Solar-powered sightseeing vehicle manufacturer: Charge at least once a month. 

III. Precautions for Vehicle Maintenance: 

Clean the surface of the battery regularly; 

2. Solar-powered sightseeing vehicle manufacturer: Regularly inspect the connection reliability of all power connectors and electrical connectors (whether the fixing screws and nuts of the batteries, motors, and electrical control wires are loose, oxidized, and need to be dealt with); 

3. Regularly check whether the control wires of the battery motor have been deformed, damaged or aged due to excessive current. If so, replace them. 

4. Regularly check the electrolyte of the lead-acid storage battery and replenish with the specific battery fluid. 

5. Regularly check the consistency of the entire battery pack. Solar sightseeing vehicle manufacturer: If there are significant differences in the static or dynamic pressure differences of each battery, please contact our after-sales staff.